S.No |
System configuration |
Number of system |
1 |
Windows 10 Pro 64 – HP recommends Windows 10 Pro. Intel® Core™ i7 processor Intel® Core™ i7-6700 with Intel HD Graphics 530 (3.4 GHz, up to 4.0 GHz with Intel Turbo Boost, 8 MB cache, 4 cores) Intel® H110 Microtower Maximum memory 32 GB DDR4-2133 SDRAM (Transfer rates up to 2133 MT/s ) Memory slots 2 DIMM Integrated: Intel® HD Graphics 9 Discrete: NVIDIA® GeForce® GT 720 (2 GB) AMD Radeon™ R5 320 (1 GB)(Integrated graphics will depend on processor) | 40 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
Concrete cube moulds |
Used to find the compressive strength of Concrete |
6 |
2 |
Concrete cylinder moulds |
Used to find the compressive strength of Concrete |
6 |
3 |
Concrete cube moulds |
Used to find the compressive and Tensile strength of Concrete |
3 |
4 |
Sieves |
Used to find the grain size of the Aggregates |
2 sets |
5 |
Flakiness gauge |
Used to find the compressive strength of Concrete |
1 |
6 |
Elongation gauge |
To determine the Elongation index of the Coarse Aggregate |
1 |
7 |
Slump cone apparatus |
Used to find the workability of Concrete |
6 |
8 |
Flow table |
Used to find the workability of stiff concrete |
1 |
9 |
Vibration table |
Used to make compaction of concrete |
1 |
10 |
Vee-bee consistometer |
To find the Consistency of the stiff concrete |
1 |
11 |
Longitudinal compressometer |
Used to determine strain in concrete specimen, from that to get Elastic Modulus of concrete |
1 |
12 |
Flexure testing machine 100kn capacity |
Used to determine strain in concrete specimen, from that to get Elastic Modulus of concrete |
1 |
13 |
Aggregate impact testing machine |
To Find Impact strength of Road metal |
1 |
14 |
Aggregate crushing apparatus |
To find the Crushing strength of Coarse aggregate |
1 |
15 |
Blains air permeability apparatus |
Used to find the Finesse of the cement |
1 |
16 |
Los angles abrasion testing machine |
Used to find Abrasive resistance of Road metal |
1 |
17 |
Bitumen penetrometer |
To determine the consistency of bitumen |
1 |
18 |
Viscometer |
To find the viscosity of the Bitumen |
1 |
19 |
Centrifuge extractor |
Used to find the binder content of the Bitumen mix |
1 |
20 |
Ring and ball apparatus |
To find the softening point of bitumen |
1 |
21 |
Ductility testing machine |
To find the ductility of bitumen from that to access suitability to use road construction |
1 |
22 |
Flash and fire point apparatus |
To find the Flash and Fire point of Tar |
6 |
23 |
Compression Testing Machine.2000kN Digital with Analog Gauge |
To find out Compressive strength of concrete |
1 |
24 |
Tile flexural strength testing machine |
To find the flexural Strength of Tiles of different sizes |
1 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
Sieves |
Used to determine the particle size distribution of soil by dry sieve analysis and to prepare soil samples |
2 sets |
2 |
Hydrometer |
Used to determine the particle size distribution of soil by wet sieve analysis |
2 |
3 |
Liquid and plastic limit apparatus |
Used to find the consistency limits of soil |
2 |
4 |
Shrinkage limit apparatus |
Used to find the shrinkage limit of soil |
2 |
5 |
Proctor compaction apparatus |
Used to find the maximum dry density and optimum moisture content of the soil by compaction |
2 |
6 |
Direct shear apparatus |
Used to find the shear strength of cohesionless soil of size less than 4.75 mm |
1 |
7 |
Thermometer |
Used to measure the temperature in specific gravity and hydrometer tests |
2 |
8 |
Field density measuring device |
Used to determine the field density of soil by using core cutter or sand replacement method |
1 |
9 |
Triaxial Test Instrument |
Used to determine the shear strength of c-φ soil |
1 |
10 |
Three gang consolidation test device |
Used to find the coefficient of consolidation of soil |
1 |
11 |
Unconfined compression test device |
Used to find the coefficient of consolidation of soil |
|
12 |
Permeabilty Apparatus |
Used to find the coefficient of permeability of coarse and fine grained soil |
2 |
13 |
Specific gravity Bottles |
Used to determine the specific gravity of cohesive soil |
6 |
14 |
Vane Shear Apparatus |
Used to find the shear strength of soft clay |
1 |
15 |
California Bearing Ratio setup |
Used to determine the CBR value of subgrade |
1 |
16 |
Oven |
Used to determine the water content of soil samples |
1 |
17 |
Weighing balance (kg) |
Used to weigh soil samples and containers |
1 |
18 |
Weighing balance (g) |
Used to weigh chemicals |
1 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
Metric Chains with and accessories |
Used to find out linear measurments by using chaining |
6 |
2 |
Prismatic Compass with stand |
Used to find the angular measurements by whole circle bearing |
10 |
3 |
Surveyor Compass with stand |
Used to find the angular measurements by Reduced bearing |
2 |
4 |
Plane table with wooden stand and accessories |
Used to get the various plots of topography |
6 |
5 |
Dumpy level with aluminum stand and accessories |
Used to determine the elevations of topography |
6 |
6 |
Theodolite with aluminum stand and accessories |
Used to find out horizontal and vertical angular measurments |
6 |
7 |
Total Station with accessories |
Used to find out horizontal and vertical angular measurments as well as sloping distances |
3 |
8 |
GPS |
To get the location and time information in all weather conditions, anywhere on or near the Earth where there is an unobstructed line of sight to four or more GPS satellites |
3 |
9 |
Pocket Stereoscope |
Used to magnify the card image, offering a wider field of view and the ability to examine the detail of the photograph. |
1 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
UTM of minimum 400 kN capacity |
Used to test the tensile strength and compressive strength of the materials |
1 |
2 |
Torsion testing machine for steel rods |
Used to determine the ultimate torsional stress and modulus of rigidity |
1 |
3 |
Izod & Charpy impact testing machine |
To find the impact resistance of materials |
1 |
4 |
Hardness testing machine a)Rockwell b)Brinnel |
Hardness is determined directly from dial reading b) To determine the hardness by measuring the depth of penetration of an indenter |
1 |
5 |
Beam deflection test apparatus |
To find out the Young’s modulus of the material |
1 |
6 |
Le Chatelier’s apparatus |
Determination of soundness property of the cement |
2 |
7 |
Vicat’s apparatus |
To determine the normal consistency and setting time of cement |
2 |
8 |
Pycnometer |
Used to determine the specific gravity of cement |
2 |
9 |
Spring testing machine |
To find Shear modulus, Stiffness of the spring, Rigidity modulus, Strain energy stored of the given material |
1 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
Closed Circuit Bernoulli’s theorem – Verification Apparatus |
To verify experimentally the validity of Bernoulli’s equation for fluid flow |
1 |
2 |
Closed Circuit Flow through Notch Apparatus |
To determine the coefficient of discharge for fluid flow |
1 |
3 |
Closed Circuit Hydraulic Flume |
To determine the coefficients of pressures of fluid flow |
1 |
4 |
Closed Circuit Flow through Orifice & Mouth Piece Apparatus |
To determine the coefficient of discharge of Orifice meter |
1 |
5 |
Closed Circuit Flow through Venturimeter |
To determine the coefficient of discharge of Venturimeter |
1 |
6 |
Closed Circuit Apparatus for Determination of Losses in pipeline due to sudden contraction, Enlargement Bends and Elbow |
To determine the friction factor for the pipes.(Major loasses) |
1 |
7 |
Open Circuit Kaplan Turbine test rig |
To determine the hydostatic head |
1 |
8 |
Open Circuit Francis Turbine test rig |
To determine the kinetic energy |
1 |
9 |
Open Circuit Pelton Wheel Turbine test rig. |
To determine the hydraulic head |
1 |
10 |
Triplee Open Circuit Deep Well Submersible Pump Test Rig. |
To determine the velocity head |
1 |
11 |
Metacentric Height Setup |
To determine the Meta-Centric height of a floating body |
1 |
S.No |
Name of the equipment |
Description of the equipment |
Quantity |
1 |
Ion Selective Electrode |
It is a transducer that converts the activity of a specific ion dissolved in a solution into an electrical potential |
1 |
2 |
UV-Spectrophotometer |
Operates in the range of 200 to 800nm, Used to study the changes in the electronic energy levels |
1 |
3 |
Gas Chromotography |
It is used for separating and analyzing the compounds that cannot be vapourised without decomposition |
1 |
4 |
Furnace |
Used for heating the samples to a very high temperature of 600 0c |
1 |
5 |
Oxygen Anlyzer |
The instrument is used to measure the Dissolved oxygen in the range of 0.1ppm which is not possible by analaytical methods |
1 |
6 |
Atomic Absorption Spectroscopy |
Works on the mechanism of absorption of metals. The heavy metals are analysed by this instrument.It gives quantitative description about the element |
1 |
7 |
Flame Photometer |
The instrument is used find the emission radiation of the neutral atoms by which we can measure the concentration of the element directly by fixing the wavelength. |
1 |
8 |
BOD Analyser |
BOD Analyser measures the amount of DO consumed by micro-organisms during the oxidation of bio-degradable substances in waste waters |
1 |
9 |
Turbidity Meter |
The instrument measures the scattered effect of the particles present in the water |
1 |
10 |
Jar Test Apparatus |
It is called as Flocculator. The particles which have the velocity less than the settling velocity are made to settle using this apparatus |
1 |
11 |
COD Digester |
The digester oxidizes the organic content in the presence of potassium dichromate |
1 |